605-0000-707 ProST 49 Installation User Guide-Rev C
36
1.
On the rear of the SDA-1, slide the locking switch to OPEN.
2.
Remove the prongs by sliding the prongs in the direction away from the switch.
3.
Insert the desired prongs by aligning the prongs with the SDA-1's prong groove, and
then sliding the prongs onto the SDA-1 until it reaches the end of the groove. (See
Figure below.)
4.
Lock the prongs in place by moving the switch to LOCK.
Plugging the SDA-1 into an Electrical Wall Outlet
Once you have attached the suitable plug prongs onto the SDA-1, you can plug it into a
standard 110/240 VAC electrical wall outlet.
Summary of Contents for ProST 4.9
