37
HEATER STRUCTURE
OPERATING SWITCHES AND DISPLAY
1. LED-DISPLAY
The display can be used to check the temperature,
timer, error codes, etc.
2. THERMOSTAT OPERATION
This light is on when the heater is in thermostat
operation mode.
3. TIMER OPERATION
This light is on when the heater is in the timer operation
mode.
4. REMOTE CONTROL RECEIVER
5. POWER BUTTON (ON/OFF)
Switches the device power on and off.
6. MODE SELECTION
This button is used to select the desired operating
mode between thermostat operation and timer
operation. If you push this lock button for 3 sec, the
controller is locked. And if you push again for 3 sec, the
controller is unlocked.
7. ARROW BUTTONS FOR ADJUSTMENT FUNCTIONS
(INCREASE/DECREASE)
These buttons are used to adjust the desired
temperature and set the length of the heating cycle.
8. OPERATION LAMP
This light is on when the burner is operating.
9. SHUTDOWN TIMER
This button activates or deactivates the shutdown timer
function.
10. SHUTDOWN TIMER INDICATOR LIGHT
The light indicates whether or not the shutdown timer is
active.
11. FUEL GAUGE
The column of three lights indicates the remaining fuel.
12. CHECK INDICATOR LIGHT
This indicator light is on if the burner has failed or shut down
during operation.
13. WIFI INDICATOR LIGHT
This indicator light is on when the wifi is connected. If the wifi
light blinks once, wifi is connected to a router, but not to the
internet. If the wifi light blinks twice, the heater is searching
for wifi network.
14. BLUETOOTH INDICATOR LIGHT
This indicator light is on when the bluethooth is connected. If
the bluetooth light is blinking it is searching for a device to
connect.
1
13
12
14
8
5
7
6
9
11
10
3
2
4
SUOMI
ENGLISH
SVENSKA NORSK D
ANSK
