43
9. Press the location cursor
to provide location
information to the
application. If you don't
want to register your heater
location, uncheck the
register location box.
Wi-Fi light blinking twice
Searching for Wi-Fi
network
Wi-Fi light blinking once
Connected to Wi-Fi, but
not to internet
Wi-Fi light on
Connected to Wi-Fi and
internet.
Bluetooth blinking
Searching for smartphone
connection
Bluetooth light on
Bluetooth connected to
smartphone
NOTICE
10
HOW TO USE
TIME CONTROL
Repetition time cycle can be set from 10min. to 55min.
1. Push power button.
2. By pushing mode button, please select
time control mode. At that time, time control
lamp is lighten.
the time is blinking, and if you don't push
button for 3sec., this displayed blinking time is
set as 'repetition time'. At that time, the former
repetition time is automatically erased.
4. At the operation mode, the operation symbol and
repetition time both are displayed, and when you
make off by pushing power button, STOP symbol
‘Interval pause time’, STOP symbol (--) and
repetition time both displayed.
5. The repitition time can be set from 10min. to 55min. The operation is as much as setting time, and
'Constant opeartion'. This means, without pause, the operation is constantly made.
Operation for 20min.
Operation for 20min.
Operation for 20min.
Stop for 5min
.
Start
Stop for 5min.
Constant
operation status
In case of setting the
repetition time as 20min.
Repetition time 20
means, every 20min.
Operation and 5min.
Pause
CONNECTING HEATER TO APPLICATION
USING MOBILE APPLICATION
TIPS FOR USING THE MOBILE APPLICATION
•
You can refresh the screen by swiping down with one finger.
•
When the heater is turned off you can reset the wifi and bluetooth settings by pressing TEMP UP and TEMP DOWN
buttons for 5 seconds.
•
Please notice that you can not start the heater from the mobile application if you turn it off.
TIPS FOR USING MOBILE APPLICATION
SUOMI
ENGLISH
SVENSKA NORSK D
ANSK
