background image

32

SAFETY INSTRUCTIONS

Do not place your hands or any items

inside the safety mesh. Touching the internal 

components of the heater may cause burns or 

an electric shock.

Do not move an operating heater. Switch off the 

heater and unplug the power-cord before moving 

the device.

Only use the heater to heat indoor spaces. Do not 

use it to dry clothing.  If the heater is used for 

heating premises intended for plants or animals, 

the exhaust gases must be fed outside through a 

flue, and a sufficient supply of fresh air must be 

ensured.

Do not use the heater in closed spaces or spaces 

primarily occupied by children, elderly people or 

disabled people. Always ensure that those in the 

same space as the heater understand the necessity 

for efficient ventilation.

We recommend that this heater should not be used at 

extremely high elevations. Do not use the device 

more than 1,500 m above sea level. At an elevation of 

700–1,500, the ventilation must be efficient. Poor 

ventilation of the space being heated may lead to the 

formation of carbon monoxide, which may cause injury 

or death.

Do not use water to clean the heater. Water 

may cause a short circuit, electrical shock 

and/or fire.

Do not use petrol, thinner or other technical 

solvents to clean the heater. They may 

cause a short circuit, electrical and/or fire.

Do not place any electrical devices or heavy 

items on the heater. Items on the device 

may cause malfunctions, electric shocks or 

injury upon falling off the heater.

Only use the heater in well-ventilated

open spaces where the air is replaced

1–2 times an hour. Using the heater 

in poorly ventilated spaces may generate 

carbon monoxide, which can lead to injury or 

death.

Do not use the device in rooms where people 

sleep without a flue leading the exhaust gases 

outside the building and without ensuring a 

sufficient supply of replacement air.

The heater must be placed in a location where 

the safety distance requirements are met. 

There must a clearance of 15 cm on all sides 

of the device and at least 1 m in front of and 

above the device.

In case of cleaning you must take out the plug 

from the outlet, wait until the heated furnace is 

cooled down sufficiently. Otherwise it may cause 

an electric shock or a burn.

Do not touch any of the heated materials, 

such as grill, furnace, etc. While the heater 

is operating or just after extinguishing the 

grill and the furnace are hot, so do not 

touch any of those parts. Especially pay 

attention to keep children away from the 

hot materials. It may cause a burn.

Do not pull out power cord strongly.

Don't put combustible things around the heater and 

reserve the fire-extinguisher.

Be careful not to clog the exhaust pipe.

Metal noise can be from sudden expansion and 

contraction of pipe at first ignition.

Do not lean more than 30 degrees during moving.

Use only DIESEL in this heater.

Never use gasoline, alcohol, etc.

Don't touch the hot parts during heating.

Do not use this heater near a fabric curtain, carpet or 

plastic or vinyl curtain which may cover the heater in 

case of falling down by the wind or by any physical 

force, may cause a fire.

Summary of Contents for AH-200i





























Reviews: