Airo SF series, Use And Maintenance Manual

Page: 42 / 73

Use and maintenance manual Self-propelled aerial platforms Page 42
7.1 Machine cleaning
To clean the machine use non-pressurized water jets after properly protecting the following parts:
-
the control stations (both platform and ground);
-
the electric control unit and all electric boxes in general;
-
the electric motors.
Do not use pressurized water jets (high-pressure cleaners) to clean the machine.
After washing the machine, always:
-
dry the machine;
-
check integrity of plates and stickers;
-
lubricate the articulated joints equipped with greaser.
7.2 General maintenance
The table below indicates the main maintenance operations and their frequency. The machine is equipped with a service
hour-meter.
Operation Frequency
Heat engine general maintenance
According to the maintenance schedule
recommended by the manufacturer of
the engine (read relevant User Manual)
Screw tightening as indicated in paragraph "Various adjustments” After the first 10 working hours
Oil level check in hydraulic tank After the first 10 working hours
Battery state (charge and liquid level) Every day
Deformation of tubes and cables Every week
Heat engine fixing on elastic supports Every month
Oil level check in hydraulic tank Every month
Articulated joints and sliding blocks greasing Every month
Stickers and code plates Every month
Operation check of “dead-man” button safety system Every six months
Screw tightening as indicated in paragraph "Various adjustments” Every year
Platform extraction clearance adjustment Every year
Periodic operation check and structure visual check Every year
Inclinometer operation check and adjustment Every year
Air purging from oscillating axe cylinders Every year
Operation check and adjustment of platform overload controller Every year
Operation check of Micro switch M1 Every year
Operation check of Microswitch M1S Every year
Operation check of Microswitch M3 (if available) Every year
Operation check of Microswitch M5 Every year
Operation check of Microswitches ST1A÷ST4A and STP1÷STP4 Every year
Brake system operation check Every year
Hydraulic filter replacement Every two years
Drive reduction gear oil change Every two years
Total oil change in hydraulic tank Every two years
DIESEL (D) AND ELECTRIC-DIESEL (E/D) MODELS. As it is possible to install different types of
Diesel engines, refer to the instructions manual of the engine manufacturer for all maintenance
operations.