Use and maintenance manual Self-propelled aerial platforms Page 38
2)
By means of hooks and steel ropes
(with
safety factor = 5, see machine weight in
Technical features) connected to the provided
holes as indicated in the picture aside.
3)
By means of a lift truck
of a suitable capacity
(see machine weight in table “Technical
features” at the beginning of this manual)
equipped with forks having at least the same
length as the machine width. Insert the forks as
indicated by the stickers on the machine. Should
these stickers be not available, DO NOT lift the
machine by means of a lift truck. Lifting the unit
by means of a lift truck is a dangerous
operation, which must be carried out by qualified
operators only.
After placing the machine onto the carrying vehicle, fasten it by means of the same holes used for
lifting.
To avoid breaking the platform overload controller, thus causing the machine to stop, DO NOT fix the
machine to the vehicle base by tying the platform.
Before carrying the unit check the stability grade.
Do not use the machine to tow other vehicles.
Fig.13
