&/($1,1*7+(35(),/7(5
7KHSUHÀOWHUFDSWXUHVGXVWDQGH[WHQGVWKHDSSOLDQFHHIÀFLHQF\
It is recommended to clean it every month.
8QFOLSWKHSUHÀOWHUDQGFOHDQLWZLWKZDUPZDWHU
and a soft brush.
&/($1,1*7+($33/,$1&(
1. Unplug the appliance before doing any manipulation.
2. Do not immerse the appliance into water or any other liquid.
'RQRWXVHFRUURVLYHDEUDVLYHRUÁDPPDEOHSURGXFWVWRFOHDQWKHDSSOLDQFH
4. Use a soft cloth to remove dust at the air inlets and outlets.
5. To avoid calc deposit, clean the tank at least once a month with an appropriate product or
with white vinegar.
STOCKAGE:
To avoid any bacteria or virus proliferation, never store the appliance with water inside the tank
and be sure that the appliance is perfectly dry.
1. Empty and clean the tank.
&OHDQWKHSUHÀOWHU
3. Store the product in a place that is protected against dust and that is clean and dry.
0$,17(1$1&(
)$4
Circumstance
Reason
Solution
The product
does not work
> The product is not correctly
plug or there is an electrical
problem.
> Plug the socket correctly and
check the voltage and the good
functioning of your electrical
system. Avoid multi sockets.
> There is a problem on the
electrical system of your
house.
> The tank is full.
> Empty the tank.
> The tank is not properly
placed.
> Push and place the tank properly.
Drop in the
appliance
performance
(less water in
the tank)
! 7KHSUHÀOWHULVGLUW\ZKDW
REVWUXFWVWKHDLUÁRZ
! &OHDQWKHSUHÀOWHU
> The air inlet or outlet is
obstructed by something.
> Leave at least 20cm behind,
around and in front of the
appliance.
> Temperature is too low.
> Below 15°C the product works in
Defrost Mode. It cannot therefore
dehumidify to a maximum of its
capacity.
> Humidity rate is already low.
Abnormal noise
> Something obstructs the fan.
> Make sure that no object obstructs
WKHDLUÁRZ
> The product has a
functioning problem.
> Contact your reseller for service
support.
E2 display
> Hygrometry sensor problem.
> Contact your reseller for service
support.
LO display
> The ambient humidity is less
than 35%. The device stops
for safety.
> Increase the room humidity rate
ZLWKDQDLUKXPLGLÀHU
www.
DLUDQGPHIUHQDLUKXPLGLÀHU
).
HI display
> The ambient humidity level
is greater than 95%. The
device stops for safety.
CL display
> The ambient temperature is
below 5°C. The device stops
for safety.
> Increase the room temperature
with a space heater (www.
airandme.fr/en/fan-heater-air).
CH display
> The ambient temperature
is above 35°C. The device
stops for safety.
14
15
