6
Once you have adjusted and configured the required airflow and under-pressure, you can then apply power to the
generator. The first time the Alarm panel is started the time and date must be configured.
AirMaid® Running:
The GREEN lamp is on. The generator is working in normal mode.
Press
to display run and alarm time.
AirMaid® Not Running: The RED lamp is flashing. An error has occurred. Please see the troubleshooting guide under
section ”5 SYSTEM TEST”.
Inspect/Clean:
Both the RED and the GREEN lamps are flashing. Contact the service company for a routine
inspection and cleaning of the generator according to the instructions found in this manual.
Call Service:
The RED lamp is flashing. An error has lasted for more than 72 hours.
Contact the service company to remedy the error.
Press
or
to step through menu options or reposition the cursor.
Press
or
to change the value.
Press
to select the current option.
Press
for 5 seconds to save the displayed value.
To ENTER the settings menu:
Press
once. ”Setup code” will be displayed. Enter 401 on the keyboard.
Press and hold
for 5 seconds. The first menu option, ”Set time”, is now displayed.
To EXIT the settings menu:
Press
and
to go to ”EXIT MENU”, then press
or wait for 60 seconds and the menu will be closed automatically.
FIRST START
CONFIGURING THE AIRMAID® ALARM PANEL
STATUS OF OPERATION
ENTERING/EXITING THE SETTINGS MENU
