- 18 -
(Fig.4). In this way, any damage to the cooktop surface
is prevented.
Under no circumstances use abrasive sponges or irri-
tating chemical detergents such as oven sprays or stain
removers.
· CONTROL AREA (Fig.5)
-
At the first ignition the cook top will be in the safety
position, that is the “
key button warning light on/off
”
will be switched on.
-
To use the cook top it will be necessary to keep the
“
key button
” depressed for 3 seconds until the “
key
button warning light on/off
” switches off.
To turn on the desired heating element :
-
depress the corresponding on/off key. The “led” of the
“
Cooking zone display
”
will be visualized flickering .
-
depress the key within 10 seconds
-
to go to position
4
or the
+
key to go to position
9
.
-
To regulate the temperature of the cooking zone use the
+
or
-
keys.
- If the hotplate is supplied with an extensive area, to
switch the second area on bring the “
Display of the
cooking area
” to position 9 and press the for 2
sec: until the decimal point is switched on to confirm.
- To switch the hotplate off press the relative on/off
button.
NOTE:
( During operation it will be possible to block /
unblock the control zone by depressing the key button
for 3 seconds).
· Timer Area (Fig.5)
The surface has the possibility to set the timer simulta-
neously on every cooking area. The timer is a function
that allows setting a time (from 1 to 99 minutes) to
automatically switch off the selected cooking area.
- Press the “
Timer
” button for 2 seconds: the display
shows “
00
” in the centre and it will show which element
is active on the right and left side.
- By continuing to press the “
Timer
” button the hotplate
is selected amongst those active.
- Press
+
or
-
to select the “
Timer
” value.
NOTE:
- If the “
Timer
” function has been imposed for more than
one cooking area, the “
Timer Display
” will show every
3 seconds the remaining time for every programmed
area.
- To cancel the “
Timer
” function, switch off the relative
cooking area.
· “MEMORY” function
If your product has the MEMORY function, the program-
ming and execution of a cooking cycle on very heating
element is permitted.
Note:
- One cycle at a time can be carried out in registra-
tion or in execution.
- The variations of power level for the times inferior to 15
sec. are not registered.
- One cooking cycle with a maximum duration of 10 hours
and a maximum of 10 variations of the power level can
be memorised.
· Memorisation of a cooking cycle
- Press the “
Memory
” button and then select the de-
sired hotplate by means of the relative “
ON/OFF
” but-
ton.
- Press the buttons
+
or
-
until the desired power is
selected.
- To terminate the memorisation cycle press once again
the button “
ON/OFF
”.
· Executing a cooking cycle
- To execute a cooking cycle already memorised, it is
sufficient to press the “
ON/OFF
” button of the interested
cooking area followed by the “
Memory
” button.
· Display
The cooking surface is supplied with a display that in
normal function is a “
WARCH
” and can also carry out
the “
COUNTDOWN
” function when the surface is off.
· Regulation of the Watch
In the installation phase set the clock in the following
way:
- Unblock the cooking surface by keeping the “
key but-
ton
” pressed down for 3 seconds until the “
indicator
light button
” is switched off.
- Press the buttons
+
or
-
under the display until it begins
flashing.
- Press
+
or
-
to set the desired time.
- Press the “
Timer
” button to confirm the selection.
· Countdown Function
- Unblock the cooking surface by keeping the “
key but-
ton
” pressed down for 3 seconds until the “indicator light
button” is switched off.
- Press the “
Timer
” button until the writing “
00
” appears
on the display.
- Press
+
or
-
to select the number of the minutes.
- Press the “
Timer
” button to confirm the selection.
At the end of the set time, an acoustic signal will be
activated.
· Safety Systems
1.
In the instance where an object is placed over the
controls, the cook top will switch off and the auto-pro-
tection system will activate automatically, this occurs
even in cases of liquid spills (water, milk, etc.) over the
controls zone.
2.
The commands keyboard has an internal tempera-
ture sensor that, in the case that the internal tempera-
ture reaches 90° (abnormal use conditions of the sur-
face without pots) the surface will automatically enter in
an automatic system of temperature limitation: switch-
ing itself off automatically.
WARNING :
when a cooking zone is switched off, the
surface of the cook top has a very high and dangerous
temperature level.
The danger is highlighted by the fact that the “cooking
zone display” will flicker until the temperature of the sur-
face will not decrease to under 50°C.
THE MANUFACTURER DECLINES ALL
RESPONSIBILITY FOR EVENTUAL DAMAGES
CAUSED BY BREACHING THE ABOVE WARNINGS.
