1. Overview
AirLive SI-104 User Manual
7
2. If ceiling mounting is not possible, put wall-mounted sensors between 4 and 6
inches(10~15 cm) from the ceiling.
3. If some of your rooms have sloped, peaked, or gabled ceilings, try to mount sensors 3
feet(0.9 meter) measure horizontally from the highest point of ceiling.
Nuisance alarms take place when Smoke Sensors are installed where they will no work
properly. To avoid nuisance alarms, do not install Smoke Sensors in the following
situations:
※
Combustion particles are the by-products of something that is burning. Thus, in or near
areas where combustion particles are present you do not install the Smoke Sensors to
avoid nuisance alarms, such as kitchens with few windows or poor ventilation, garages
where there may be vehicle exhaust, near furnaces, hot water heaters, and space
heaters.
※
Do not install Smoke Sensors less than 20 feet (6 meters) away from places where
combustion particles are normally present, like kitchens.
If a 20-foot distance is not possible, e.g. in a mobile home, try to install the alarm as far
away from the combustion particles as possible, preferably on the wall. To prevent
nuisance alarm alarms, provide good ventilation in such places.
※
In very dusty or dirty areas, dirt and dust can build up on the alar
m’s sensing chamber,
to make it overly sensitive. Additionally, dust or dirt can block openings to the sensing
chamber and keep the alarm from sensing smoke.
※
Near fluorescent lights, electrical “noise” from fluorescent lights may cause nuisance
alarms. Install Smoke Sensor at least 5 feet (1.5 meters) from such lights.
1.11 Installation
1. At the place where you are going to install your Smoke Sensor, draw a horizontal line
six inches long.
2. Remove the mounting bracket from your device by rotating it counterclockwise.
Summary of Contents for Z-Wave Plus SI-104
Page 1: ...SI 104 Smoke Sensor User Manual ...
Page 5: ......
