AirLive SD-2020, User Manual, Page: 83 / 111

8. PTZ
AirLive SD-2020 User’s Manual
77
8.4 Sequence
The IP Camera supports totally eight Sequence Lines; each Sequence Line consists of up
to 64 Preset Points. Please refer to the instructions below to program a Sequence Line.
NOTE:
Before setting this function, users must pre-define at least two Preset Points.
- Sequence Setting
Please click on the <Edit> button in <Sequence Setting> section to enter the
Sequence setting menu.
z
Sequence Line
Please select the number of Sequence Line to be set from the drop-down list in
the top of the Sequence setting menu.
z
Sequential Preset Points Setting
Please setup each Preset Point of the programmed Sequence Line in order,
assigning a Preset Point from the <Name> list for the specified number of Preset
Point (click <Pre Page> or <Next Page> button to reach preset point 1 to 256) and
entering both Dwell Time (0~255) and Speed (0~14) into the corresponding fields.
When finishing the sequential Preset Points setting, please click on the button <Save>
in the top of the Sequence setting menu.
- Sequence Run
Select the specified Sequence Line from the drop-down list, click on the <Go> button,
and then the camera will start moving forward each scene sequentially as
programmed.
To view the camera executing a Sequence Line in full screen mode, please move the
cursor onto the live view pane, right-click and left-click to select “fullscreen”. Then
users can view the camera navigation in full screen.
To stop running the Sequence Line, simply move the cursor to the live view pane and
move the camera in any direction.