AirLive SD-2020, User Manual

Page: 60 / 111

6. System
AirLive SD-2020 User’s Manual
54
6.11 Storage Management
Users can implement local recording to the Micro SD / SDHC card up to 32GB. This page
shows the capacity information of the Micro SD card and a recording list with all the
recording files saved on the memory card. Users can also format the SD card and
implement automatic recording cleanup through the setting page.
To implement Micro SD card recording, please go to the <Recording> page (refer to the
section
Recording ) for activation.
NOTE:
Please format the Micro SD / SDHC card when using for the first time. Formatting
will also be required when a memory card already being used on one camera and later
transferred to another camera with different software platform.
- Device information
When users insert the Micro SD / SDHC card, the card information such as the memory
capacity and status will be shown at Device Information section.
When the memory card is successfully installed, the memory card status shall be shown
at <Device information> section in the Storage Management page.
- Device setting
Click on the <Format> button to format the memory card.
- Disk cleanup setting
Users can enable automatic recordings cleanup by specifying the time and storage
limits.
- Recording List
Each video file on the Micro SD / SDHC card will be listed in the Recording list. The
maximum file size is 60 MB/per file.
When the recording mode is set as <Always> (consecutive recording) and the Micro SD
/ SDHC card recording is also allowed to be enabled by events triggered, once events
occur, the system will immediately implement events recording to the memory card.
Then the IP Camera will return to the regular recording mode after events recording.
z
Remove
To remove a file, select the file first, and then click on the <Remove> button.