manualshive.com logo in svg

AirLive SD-2020, User Manual

Share
Download
AirLive SD-2020 User Manual Download Page 47

6. System 

 
 
 
 
 

AirLive SD-2020 User’s Manual

 

41 

6.6   FTP 

- FTP 

The Administrator can set as sending alarm message to a specific File Transfer Protocol 
(FTP) site when an alarm is triggered. Users can assign alarm message to up to two 
FTP sites. Enter the FTP details, which include server, server port, user name, 
password and remote folder, in the fields.   
 
Click on <Save> when finished. 

 

 

 
 

6.7   HTTP 

- HTTP 

A HTTP Notification server can listen for notification messages from IP Cameras by 
triggered events. Enter the HTTP details, which include server name (for instance, 

http://192.168.0.1/admin.php

), user name, and password in the fields. <Alarm> 

triggered and <Motion Detection> notifications can be sent to the specified HTTP 
server. 
Click on <Save> when finished. 
Please refer to: section 

Application> Send HTTP notification 

or 

Motion Detection>Send 

HTTP notification

 for HTTP Notification settings. 

 

Summary of Contents for SD-2020
















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands