manualshive.com logo in svg

AirLive SD-2020, User Manual

Share
Download
AirLive SD-2020 User Manual Download Page 21

3. Using IP Camera via Web Browser 

 
 
 
 
 

AirLive SD-2020 User’s Manual

 

15 

 

 

 

 

3.1 Windows Web Browser 

1. Open your web browser, and enter the IP address or host name of the IP camera in the 

Location / Address field of your browser.   

Note:

 If you only want to view the video without accessing Setting screen, enter 

“http://<IP>/index2.htm” as your web URL. 
 

2. Use the default account “

admin

” and default password “

airlive

”. 

                         

 

 

Note: 

The default user name “

admin

” and the password “

airlive

” are set at the factory for 

the administrator. You can change them in the Account Menu. (Please check “System 

→

 

Security 

→

 User”) 

 
3. The monitor image will be displayed in your browser. In the top side of main configuration 

are “System”, “Streaming” and “PTZ”. For more details, you can check the following 
chapters. 

3  

3. 

Using IP Camera via 

Web Browser 

Summary of Contents for SD-2020
















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands