manualshive.com logo in svg

AirLive SD-2020, User Manual

Share
Download
AirLive SD-2020 User Manual Download Page 38

6. System 

 
 
 
 

 

AirLive SD-2020 User’s Manual

 32

 

 

4. IEEE 802.1X 

The IP Camera is allowed to access a network protected by 802.1X/EAPOL 
(Extensible Authentication Protocol over LAN). 
 
Users need to contact with the network administrator for gaining certificates, user IDs and 
passwords 
 
- 

CA Certificate 

The CA certificate is created by the Certification Authority for the purpose of validating 
itself. Upload the certificate for checking the server’s identity. 

 

-

Client Certificate / Private Key 

Upload the Client Certificate and Private Key for authenticating the IP Camera itself. 

 

-

Settings 

z

 

Identity

 

Enter the user identity associated with the certificate. Up to 16 characters can be 
used. 

z

 

Private Key Password

 

Enter the password (maximum 16 characters) for user identity. 

z

 

Enable IEEE 802.1X 
Check the box to enable IEEE 802.1X. 
Click on <Save> to save the IEEE 802.1X / EAP- TLS setting. 

 

Summary of Contents for SD-2020
















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands