AirLive P-201, User Manual

Page: 49 / 114

:rm=203.66.191.186:\
:rp=lpt1:\
:lf=/var/spool/lpd/pserverd.log:\
:sd=/var/spool/lpd/pserverd:\
:mx#0:
Lines should be indented with tabs. More than one printer name can be
used, with variants separated by vertical bars (name1|name2).
The rm= entry should correspond to the IP address you have assigned to
the print server. You can also use a host name if you have assigned one in the
/etc/hosts file.
The sd= entry should correspond to the spool directory you created in the
previous step.
The rp= entry should correspond to the port name of the remote printer.
The values should be one of lpt1, lpt2 or lpt3 depends on the printer port.
The print server should now be available for printing from your Unix host.
44