AirLive P-201 User Manual Download Page 34

Page: 34 / 114

4.2 Windows NT/2000/2003 Server Installation and

Setup

Please follow the procedures described below for installation and construct

a peer-to-peer connection (PTPP) between Windows NT/2000/2003 Server and

Print Server.

Step1.

If this is your first time installing print server, please install the

administrator software on Windows NT/2000/2003 server first. Refer to section

3.2 for installation instructions.

If your network has already installed a working print server and your

Windows NT/2000/2003 server has not yet installed the PTPP driver, please

install the client software. Refer to section 3.4 and 3.5 for installation

instructions.

Step2.

Please add/configure the Peer-to-Peer Printing of the Windows

NT/2000/2003 network printer and verify that you can print from Windows

NT/2000/2003 to the print server by the installed PTPP driver.

Step3.

Share the above server’s printer to the network by performing the standard

Windows printer sharing process.

Summary of Contents for P-201



















































































































Search results

Summary of Contents for P-201

Reviews:

Related manuals for P-201

Brands by name

Popular brands

AirLive P-201, User Manual

Search results

Summary of Contents for P-201

Reviews:

Related manuals for P-201

Brands by name

Popular brands