AirLive P-201 User Manual Download Page 17

Page: 17 / 114

2. Hardware Installation

1. Unpack the print server package and verify that all the items listed in

the section 1.2 are provided.

2. Connect the print server to the printer you want to share on the network.

3. Connect the print server to your network by attached the network cable

to the UTP port of the print server.

4. Connect the power adapter to the print server. The print server will

perform the Power-On-Self-Test (POST) after it is powered on. During the

POST, the three Printer Port LEDs will be on. When the LEDs are unlighted,

the print server is ready.

NOTE1: MUST use the power adapter shipped with the print server, do

NOT use any other power adapter from any sources.

NOTE2: To prevent the compatibility problem between print server and a

few printer, it is recommended that you power on the print server before
the printer.

Summary of Contents for P-201



















































































































Search results

Summary of Contents for P-201

Reviews:

Related manuals for P-201

Brands by name

Popular brands

AirLive P-201, User Manual

Search results

Summary of Contents for P-201

Reviews:

Related manuals for P-201

Brands by name

Popular brands