AirLive IAS 2000 User Manual Download Page 69

Page: 69 / 128

Chapter 5. Web Interface Configuration

Air Live IAS-2000 User’s Manual V1.0

DDNS:

Enabling or disabling of this function.

Provider:

Select the DNS provider.

Host name:

The IP address/domain name of the WAN port.

Username/E-mail:

The register ID (username or e-mail) for the DNS provider.

Password/Key:

The register password for the DNS provider.

Please click

Apply

and these settings will become effective immediately.

5.2.7 IP Mobility

Enable IP PNP

At the user end, you can use any IP address to connect to the system. Regardless of what the IP address at the

user end is, you can still authenticate through IAS-2000 and access the network.

Enable Mobile IP

If you construct a network environment using several sets of IAS-2000, a user can use the same group of IP

configurations. When you roam into different locations, the connection will be kept alive; therefore no

disconnection will occur for example when downloading data.

5.3 User

Authentication

This section includes the following functions:

Authentication Configuration

Policy Configuration

Black List

Configuration

Guest User Configuration

and

Additional Configuration

Summary of Contents for IAS 2000

































































































































Search results

Summary of Contents for IAS 2000

Reviews:

Related manuals for IAS 2000

Brands by name

Popular brands

AirLive IAS 2000, User Manual

Search results

Summary of Contents for IAS 2000

Reviews:

Related manuals for IAS 2000

Brands by name

Popular brands