Appendix A. External Network Access
Air Live IAS-2000 User’s Manual V1.0
.
119
Appendix A External Network Access
If all the steps are set properly, IAS-2000 can be further connected to the managed network to experience the
controlled network access environment. Firstly, connect an end-user device to the network at IAS-2000’s
LAN1/LAN2 and set to obtain an IP address automatically. After the network address is obtained at the user end,
open an Internet browser and link to any website. Then, the default logon webpage will appear in the Internet
browser.
1. First, connect a user-end device to LAN3/LAN4 port of
IAS-2000, and set the dynamical access network. After
the user end obtains the network address, please open an
Internet browser and the default login webpage will
appear on the Internet browser.
Key in the username and password created in the local
user account or the on-demand user account in the
interface and then click
Submit
button. Here, we key in
the local user account (e.g.
test@Local
for the username
and
test
for the password) to connect the network.
2. Login page appearing means IAS-2000 has been installed
and configured successfully. Now, you can browse the
network or surf the Internet!
3. But if you see the following screen with a sentence,
“Sorry,
this feature is available for on-demand user only”
, it
means that you have clicked the wrong button, the
“Remaining”
button. This button is only for on-demand
users and if you are not an on-demand user, please just
click the
Submit
button.
