AirLive IAS 2000 User Manual Download Page 76

Page: 76 / 128

Chapter 5. Web Interface Configuration

Air Live IAS-2000 User’s Manual V1.0

Edit User:

If you want to edit the content of individual user account, click the username of the desired user

account to enter the

Edit User

Interface for that particular user, and then modify or add any desired information

such as

“Username”

“Password”

“MAC”

“Maximum Bandwidth”

“Request Bandwidth”

“Policy”

and

“Remark”

(optional) . Then, click

Apply

to complete the modification.

Radius Roaming Out / 802.1x Authentication:

These two functions can be enabled or disabled separately.

Click

Radius Client List

to enter the

Radius Client Configuration

interface. Choose the desired type,

Disable

Roaming Out

802.1x

and key in the related information and then click

Apply

to complete the settings.

Roaming Out:

When you have selected

“Roaming Out”

, the local users can login from other sites using their

original accounts.

802.1x:

This system support

PEAP

(

rotracted

xtensible

uthentication

rotocol) function. The

802.1x function must be used in LAN ports.

Summary of Contents for IAS 2000

































































































































Search results

Summary of Contents for IAS 2000

Reviews:

Related manuals for IAS 2000

Brands by name

Popular brands

AirLive IAS 2000, User Manual

Search results

Summary of Contents for IAS 2000

Reviews:

Related manuals for IAS 2000

Brands by name

Popular brands