AirLive IAS 2000 User Manual Download Page 78

Page: 78 / 128

Chapter 5. Web Interface Configuration

Air Live IAS-2000 User’s Manual V1.0

Server IP:

Enter the IP address/domain name given by your ISP.

Port:

Enter the Port given by your ISP. The default value is 100.

SSL Setting:

If this option is enabled, the POP3 protocol will perform the authentication.

5.3.1.3 Radius

Server

Choose

“Radius”

in the

Authentication Method

field, the hyperlink beside the pull-down menu will become

“Radius Setting”

Click the hyperlink for further configuration. The Radius server sets the external authentication for user accounts.

Enter the related information for the primary server and/or the secondary server (the secondary server is not

required). The blanks with red star are necessary information. These settings will become effective immediately after

clicking the

Apply

button.

Summary of Contents for IAS 2000

































































































































Search results

Summary of Contents for IAS 2000

Reviews:

Related manuals for IAS 2000

Brands by name

Popular brands

AirLive IAS 2000, User Manual

Search results

Summary of Contents for IAS 2000

Reviews:

Related manuals for IAS 2000

Brands by name

Popular brands