AirLive IAS 2000 User Manual Download Page 11

Page: 11 / 128

Chapter 1. Before You Start

Air Live IAS-2000 User’s Manual V1.0

customer's premises to the dial-up telephone network. ISDN uses standard POTS copper wiring to deliver voice,

data or video.

ISP

Internet Service Provider. A company that provides access to the Internet.

LAN

Local Area Network. A system of connecting PCs and other devices within the same physical proximity for sharing

resources such as an Internet connections, printers, files and drives. When Wi-Fi is used to connect the devices, the

system is known as a wireless LAN or WLAN.

LDAP

Lightweight Directory Access Protocol. A set of protocols for accessing information directories. LDAP is based on

the standards contained within the X.500 standard, but is significantly simpler. And unlike X.500, LDAP supports

TCP/IP, which is necessary for any type of Internet access. Because it's a simpler version of X.500, LDAP is

sometimes called X.500-lite.

Although not yet widely implemented, LDAP should eventually make it possible for almost any application running

on virtually any computer platform to obtain directory information, such as email addresses and public keys.

Because LDAP is an open protocol, applications need not worry about the type of server hosting the directory.

Local User

A user that has signed up for an account from a specific ezboard community, enabling the user to participate only in

that ezboard as a registered user. Global user registration from the ezboard home page is recommended for full

access to all ezboard communities and the Control Center.

MAC

Media Access Control. Every wireless 802.11 device has its own specific MAC address hard-coded into it. This

unique identifier can be used to provide security for wireless networks. When a network uses a MAC table, only the

802.11 radios that have had their MAC addresses added to that network's MAC table will be able to get onto the

network.

Mbps

Megabits Per Second. One million bits per second; a unit of measurement for data transmission.

NAT

Network Address Translation.

A network capability that enables a houseful of computers to dynamically share a

single incoming IP address from a dial-up, cable or xDSL connection. NAT takes the single incoming IP address and

creates new IP address for each client computer on the network.

Summary of Contents for IAS 2000

































































































































Search results

Summary of Contents for IAS 2000

Reviews:

Related manuals for IAS 2000

Brands by name

Popular brands

AirLive IAS 2000, User Manual

Search results

Summary of Contents for IAS 2000

Reviews:

Related manuals for IAS 2000

Brands by name

Popular brands