Setup
3A1174B
9
10. Add pre-mixed texture mix to material hopper. See
Mixing Material, page 10.
11. Continue to trigger gun and spray into waste bucket
until a steady stream of material sprays out of gun.
12. Turn on Air compressor and open gun valve to
desired setting.
13. To achieve uniform spray pattern, adjust air valve
and flow adjustment nut on gun. If you can not
achieve a desired pattern, change nozzle, page 11.
NOTE: Fluid flow will be restricted if the material hose is
kinked.
NOTE: To increase pump life, turn power off when not
spraying.
ti9775a
