Setup
8
3A1174B
Setup
Texture Spraying
1.
Connect air hose to user-supplied air compressor &
material hose (G) to material hose outlets.
2.
Connect air hose to gun.
3.
Open air valve.
4.
Connect material hose to gun.
5.
Install spray nozzle. See Recommended Nozzle
Selection Chart, page 11.
NOTE: To break in new pump run dry for no more than 2
minutes.
6.
Fill material hopper with 1 gallon of water.
7.
Turn power switch (K) ON (leave compressor OFF).
8.
Point gun into waste bucket and pull trigger to pump
water through the system. Continue to trigger gun
until material hopper is empty.
9.
Install burp guard (J).
ti8375a
ti8534a
ti8528a
ti8705a
ti9774a
ti8372a
ti9202a
ti8376a
