16
Gradually tighten the connections. Using the spirit level make sure that the blocks being
connected remain levelled.
Once you connect the blocks 1 and 2 the sealing between the blocks should be adhering to the
construction of blocks along the whole length of the sealed connection. Make a visual check to
make sure that no light passes through the connection of the blocks.
Repeat the steps 5 through 8 and connect the blocks 2 a 3.
Using the spirit level make sure that the connected blocks still remain levelled.
Description of assembled unit
Key:
1.
Exhaust (extract air)
2.
Exhaust fan Mi
3.
Temperature sensor TU2
4.
Manometer of exhaust fan PMi *)
5.
Heat exchanger
6.
Water cooling / direct evaporator *)
7.
Water heating *)
8.
Capillary thermostat TFK *)
9.
Manometer of supply fan PMe *)
10. Temperature sensor TU1
11. Water heater pump *)
12. Water heater pump mixing valve *)
13. Supply fan Me
14. Junction box
15. Exhaust (supply air)
16. Intake (supply air)
17. Shut-off flap (supply air) Se *)
18. Temperature sensor TEA
19. Filter manostat PFe *)
20. Supply air filter
21. Condensate drain
22. Bypass flap SB
23. Circulation flap SC *)
24. Exhaust air filter
25. Filter manostat PFi *)
26. Temperature sensor
27. Shut-off flap (extract air) Si *)
28. Grounding point
29. Intake (extract air)
*) Optional equipment
1
3
4
5
6
7
8
11
12
13
14
15
16
17
20
22
19
23
24
27
29
2
21
28
9
10
18
25
26
