16
DV50 DV80
(Integral CO
2
Sensor)
EXPERT SETTINGS
DEPLOYMENT WIZARD
FIREPLACE PROFILE
When you want to set the
Fireplac
e function settings, proceed as
follows:
1. The deployment wizard
Fireplace
function profile screen is
opened.
2. Set the profile timer duration in minutes by using the
Plus
and
Minus
buttons.
3. The profile duration is now set.
4. Press the
Right arrow
button.
5. The screen for setting the profile supply air fan speed appears.
6. Set the
Fireplace
function supply air fan speed as a
percentage of the maximum by using the
Plus
and
Minus
buttons.
TIP
In the fireplace mode, we recommend that you increase the
supply air fan speed, in order to obtain a positive pressure at the
ventilation zone. We do not recommend reducing the extract air fan
speed.
7. The
Fireplace function
supply air fan speed is now set.
8. Press the
Right arrow
button.
9. The screen for setting the profile extract air fan speed appears.
10. Set the
Fireplace function
extract air fan speed as a
percentage of the maximum by using the
Plus
and
Minus
buttons.
11. The
Fireplace function
extract air fan speed is now set.
12. Press the
Right arrow
button.
13. The profile timer setting screen is displayed.
14. Use the
Plus
and
Minus
buttons to select whether the profile
timer function is enabled or not. The options are:
•
On
— When the timer is enabled, the
Fireplace function
is only on for the period defined in the timer.
•
Off
— When the timer is disabled, the
Fireplace function
is used until you (or the week clock) change the profile.
15. The profile timer function is now set.
16. Press the
OK
button.
17. The
Fireplace function
settings are now complete.
