10
DV50 DV80
(Integral CO
2
Sensor)
DEPLOYMENT WIZARD
BASIC SETTINGS
SET THE AUTOMATIC DAYLIGHT SAVING TIME
By default, the system automatically switches to the summer time.
If you want to use the automatic daylight saving time, proceed to
the next step by pressing the right arrow button. If you want to use
the manual daylight saving time, proceed as follows:
1. Press the
Minus
button. The Dayl.Saving Time setting value is
changed to
Off
.
2. The manual daylight saving time setting is now set.
3. Proceed to the next phase by pressing the
Right arrow
button.
SET THE DATE
1. Use the
Plus
and
Minus
buttons to set the date.
2. Press the
Right arrow
button.
3. Use the
Plus
and
Minus
buttons to set the month.
4. Press the
Right arrow
button.
5. Use the
Plus
and
Minus
buttons to set the year.
6. Press the
OK
button:
7. The date is now set.
FINISHING UP THE DEPLOYMENT
When the basic settings have been completed, the
acknowledgement screen is opened.
If you want to continue and make the advanced settings for the
ventilation unit, press the
OK
button.
If you want to do not wish to proceed with the advanced settings
and use the ventilation device on factory settings, press the
Back
button: Expert settings for the ventilation device can be installed at
a later date when required.
EXPERT SETTINGS
The following chapters describe the ventilation device deployment
wizard phase, where you activate the expert settings.
IMPORTANT
Some deployment phases require special equipment, such as an
air flow meter.
