AirDesign RIDE 3, Manual And Service Book

Page: 48 / 75

47
and storage.
2. Starting either at one tip or at the centre of the wing, gather all the leading edge cell walls
together so that the polyamide rods are side by side.
IMPORTANT NOTE: if you pack the glider on rough ground, first gather the wing into a
‘cauliflower’ by pulling in the lines , and then pack the leading edge. Dragging the canopy over
rough ground will damage the fabric.
3. Lay the leading edge flat on the packing bag / AirPack and secure with the strap just below
the end of the polyamide rods.
4. Adjust the packed leading edge to ensure all polyamide rods are flat against each other.
5. Fold the back of the wing in from the centre to the tips using a concertina folding style
–
alternating left – right. Also, by doing this the remaining air will get out from the cannopy.