Issue Date: 29 Jan 2009 Rev 1
Page 29
GLIDER MODEL:
Sting 3 168
MANUFACTURED BY:
AIRBORNE WINDSPORTS Pty Ltd
NOTE: These specifications are intended only as a guideline for determining whether a given
glider is a certified model and whether it is in the certified configuration.
Be aware, however, that no set of specifications, however detailed, can guarantee the ability
to determine whether a glider is the same model, or is in the same configuration as was
certified, or has those performance, stability, and structural characteristics required by the
certification standards. An owner’s manual is required to be delivered with each certified
glider, and it is required that it contain additional airworthiness information.
Metric
Imperial
Weight of glider with all essential parts and without
coverbags and non essential parts.
30.0 kg
66.0 lbs
Leading Edge Dimensions
Nose Plate anchor hole to crossbar attachment hole
3355 mm
132.08”
Nose Plate anchor hole to rear sail attachment point
5638 mm
221.96”
Outside diameter at nose
50 mm
1.97”
Outside diameter at cross bar
52 mm
2.05”
Outside diameter at rear sail attachment point
50 mm
1.97”
Crossbar Dimensions
Overall pin to pin length from leading edge attachment
point to hinge bolt at glider centre line
2905 mm
114.37”
Largest outside diameter
62 mm
2.44”
Keel dimensions
The cross bar centre load bearing pin
1340 mm
52.76”
The pilot hang loop
Fwd
Rear
1685 mm
1715 mm
66.39”
67.52”
Sail Dimensions
Chord length at 3 ft outboard of centre line
2130 mm
83.85”
Chord length at 3 ft inboard of tip
1160 mm
45.67”
Span (extreme tip to tip)
9460 mm
372.43 “
Location of Information Placard
Cross Bar
Location of Test Fly Sticker
Front Keel
Recommended Pilot Hook in Weight Range
80-120 kg
176-265 lbs
Recommended Pilot Proficiency
Nov/Int
Nov/Int
Summary of Contents for Sting 3
