Issue Date: 29 Jan 2009 Rev 1
Page 24
Inspection
Inspect tubing for cracks, damage from abrasion, elongated holes or distortion in tube surface.
Never attempt to repair tubing, always replace with new part. Inspect tubing for corrosion in
and out. If corrosion is present the component should be replaced.
Replacement
Aluminium tube comes in many different sizes and grades. It is important that the correct
replacement parts are used.
B
OLTS
Installation & Removal
•
After tightening, all bolts should have at least one thread showing.
•
All self-locking nuts should not be installed more than two times.
•
Be sure not to over-torque bolts when installing.
•
Never deform a tube when tightening a bolt.
Inspection
Check bolts for bends, worn shanks, bad threads or corrosion.
S
AILS
Sail Inspection
•
Check for tears in the fabric or any loose or unravelled seams.
•
Check all inspection zippers to see if they function smoothly and close completely.
•
Inspect tip webbing for damage.
Sail may be repaired with appropriate sail tape or a sewn on patch.
Airborne
or an authorised
agent should be consulted about sail repairs. Keep the sail clean of oil and dirt by washing
the sail with soap and water. Keep the sail covered when not in use.
CONTINUED EXPOSURE TO SUN DRAMATICALLY SHORTENS THE LIFE OF SAILS
-
possibly to as little as six months.
Summary of Contents for Sting 3
