![background image](http://html1.mh-extra.com/html/airborne-windsports/sting-3/sting-3_owners-and-service-manual_2876053014.webp)
Issue Date: 29 Jan 2009 Rev 1
Page 14
•
Unzip undersurface and check cross bar hinge and restraining strap. The VG should be
operated and inspected to ensure it is functioning properly.
•
Ensure that the double surface is zipped up and nose fairing is secure.
•
Clip your harness into the main and
back-up
hang loops and perform a “hang check”. Make
sure that your harness is the correct distance from the base bar, your leg loops are secure
and your karabiner is locked.
HANG GLIDER DAILY INSPECTION
Inspection of the following items after every assembly of the glider is required:
•
Check for bends, dents, scratches in all tubes;
•
Check wire ends for bolt and/or other fastener security;
•
Check wires for twisted or jammed thimbles;
•
Check wires are free of kinks, frays, abrasions, broken strands etc;
•
Nose plate connections;
•
Tips secure;
•
Battens;
•
A-frame connections at the top and base on both sides;
•
Variable geometry operation (full and free movement);
•
Rear keel connections;
•
Cross-bar tension wire;
•
Cross-bar operation (free floating);
•
King post connections;
•
Reflex bridles - attached and tension correct;
•
Sail condition;
•
Harness straps and webbing secure, height adjustment correct;
•
Emergency parachute secure, correctly mounted and attached, operating handle accessible.
Summary of Contents for Sting 3
