©
A
ir
B
orne
W
ind
S
ports
P
ty.
L
td.
SECTION 4
Aircraft Operating Instructions Edge XT 912
NORMAL PROCEDURES
January 2014
Issue 2.4
Page 75
4.10.8
Trimmer Cover
If applicable, position the trimmer handle so that the handle is at
90 degrees to the down tube with the knob facing forward. Fit the
trimmer cover.
Figure 36 Section 4. Trimmer Cover
4.10.9
Disconnect Nose Catch and Remove Nose Cone
Remove the nose cone. Disconnect nose catch by removing the pip
pin. The pip pin button should be depressed with the thumb while
simultaneously pulling the pip pin out. Re-insert pip pin in nose
channel.
Figure 37 Section 4. Disconnect Nose Catch and Remove Nose Cone
4.10.10
Remove Sail Cowling
Undo the securing Velcro tabs at the front of the cowl.
Remove the sail cowling from the top of sail.
Figure 38 Section 4. Remove Sail Cowling
4.10.11 De-Tension Pull Back Cable
Depress quick clip with left thumb. Use right hand to pull on the webbing
handle. Remove the shackle from the quick clip block and allow webbing
handle to move forward.
Figure 39 Section 4. De-tension Pull Back Cable
