©
A
ir
B
orne
W
ind
S
ports
P
ty.
L
td.
SECTION 4
Aircraft Operating Instructions Edge XT 912
NORMAL PROCEDURES
January 2014
Issue 2.4
Page 61
4.4.11
Optional - Install Windscreen XT 880mm
If you have a tall windscreen:
Remove windscreen from protective cover.
Press the clip (Part # 108917) onto the trike mast
brace. Wrap the hook and loop around the clip and the
mast brace.
Figure 25 Section 4. Secure Windscreen XT 880mm Top
Locate the bottom centre hole of the windscreen on
the centre locator on the cockpit. Fasten by placing the
O-ring, washer and then the retaining pin. Repeat for
the bottom sides.
Inspect the windscreen attachment prior to every flight.
Removal is the reverse of this procedure.
Figure 26 Section 4. Secure Windscreen Extension Bottom
Clean the windscreen using a soft clean cloth and mild detergent as necessary. Wiping the windscreen
in one direction only for the life of the windscreen is good practice. Nominaly verticaly.
