©
A
ir
B
orne
W
ind
S
ports
P
ty.
L
td.
SECTION 4
Aircraft Operating Instructions Edge XT 912
NORMAL PROCEDURES
January 2014
Issue 2.4
Page 53
4.2.11
Install Pull Back Cover
Ensure that the front Velcro tabs are folded back and secured to the top
of the cover.
Figure 9 Section 4. Install Pull Back Cover
4.2.12
Attach Nose Catch
The nose catch should now be attached so that the pip pin is inserted
through both the nose catch and channel. Ensure the pip pin cap is
secure.
Figure 10 Section 4. Attach Nose Catch
4.2.13
Locate Nose Battens
Insert both nose battens tail end first. Locate the front of the
batten on the alloy stubs on the front of the keel tube.
Figure 11 Section 4. Locate Nose Battens
4.2.14
Install Nose Fairing
Attach the nose fairing by applying the top Velcro first then gently tension over the nose plates and attach
the Velcro to the undersurface.
Figure 12 Section 4. Install Nose Fairing
4.2.15
Insert Remaining Main Sail Battens
Remove tip bags. Insert remaining main sail battens at the tips.
