CONTROL BUTTONS
In VistaCam Omni ic 4 installation, after initial Printer setup only the PRINT command to the printer is
controlled by the multi-function footswitch. All other multi-function footswitch commands control the
VistaCam Omni ic 4.
INDICATOR LIGHTS
READY
Indicates that the printer is ready to operate. (READY and OPERATE illuminate
at the same time.) When the printer is turned on, the READY light flashes for a few
seconds and then steadily illuminates. In the printing mode, READY is off.
PAPER
PAPER flashes on and off after the PRINT button has been pressed under the following conditions:
1. The print paper tray is empty.
2. The print paper is reversed.
3. The print paper is bent or folded.
4. Incorrect print paper is in the tray.
INK
INK flashes on and off under the following
conditions:
1. The print cartridge tray is not installed.
2. The print cartridge ink ribbon is used up.
3. The print cartridge ink ribbon is torn.
4. The print cartridge cover is open.
23
PUSH-
OPEN
SELECT
FIELD
FRAME
MEMORY
TO
OPEN
PAPER
READY
INK
IMAGE PRINTER PN 77300
OPERATE DISPLAY
PAPER
DISCHARGE
CONTROL
COVER
MONITOR
SELECT (+/-)
INPUT
PICTURE
SUB MENU
MENU
INSIDE THE CONTROL
COVER:
MAJOR COMPONENTS
MAJOR COMPONENTS
FIG. 24 PRINTER CONTROL PANEL
n
INSIDE THE CONTROL COVER
NOTE:
To view these functions on the monitor
connect an S-Video cable from the
printer S-Video out to the S-Video input
on the monitor.
MENU - Press to access MENU.
SUB MENU - Press to access SUB-MENU.
SELECT (+/-) - Press to change the parameters
in the SUB-MENU.
PICTURE -
Press to select MULTI MODE.
INPUT
-
Press to select input S-VIDEO.
n
INSTALLATION CONNECTIONS
