VISTACAM OMNI ic 4
PN 78400
22
FIG. 23
COUNTER
FIG. 22
WALL
TRANSPORT
MAJOR COMPONENTS
MAJOR COMPONENTS
n
3 POSITION HANDPIECE HOLDER
The handpiece holder is designed with three positions so it can be oriented to an "up" (tilted slightly
forward for ease of use) ready-to-use position whether the VistaCam Omni is installed on a counter,
wall mounted, or transported to another operatory. Simply grasp the knob at the end of the holder and
turn to lock into position. Loop the umbilical around the knob. (See Fig. 22)
n
TRANSPORTING THE CAMERA
Secure the handpiece and umbilical when transporting the camera.
-
Place the handpiece holder in an "up" position, insert the
handpiece and loop the umbilical around the extension on the holder.
-
Or, hold the looped umbilical and handpiece while holding the
camera. Make sure the handpiece and umbilical are secure before
taking the camera to the printer location.
n
INSTALLATION CONNECTIONS
BACK OF VISTACAM OMNI ic 4
