12
3. MULTI-FUNCTION FOOTSWITCH CONTROLS
IMPORTANT NOTE FOR VISTACAM OMNI ic 4
Make sure that the Printer is set to a SINGLE image format (MULTI OFF)
in the FRAME mode, with the MONITOR OFF (green light OFF).
See PRE-INSTALLATION CHECK for how to set up the printer.
OPERATION
OPERATION
n
Multi-operatory network with QDA (Queuing Distribution Amplifier)
Press to print the stored image displayed on the monitor. There is a delay of several seconds
before the printer at the base station begins processing an image to print. If PRINT is
pressed by more than one operatory at approximately the same time, the QDA receives the
print signals and sends them to the printer in the order they were received. The image is
frozen at the operatory in the VistaCam Omni ic 4 until the printer has processed all PRINT
commands received prior to this operatory's PRINT command. As soon as the printer has
received and processed the image from the operatory, the VistaCam Omni ic 4 will be
released to view other images. If the monitor in the operatory displays the icon in the lower
right corner (SINGLE image) or the frame (QUAD image), the VistaCam ic 4 is free to
capture additional images.
