Air innovations 99H0360-10, Installation, Operation And Maintenance Manual, Page: 68 / 85

68
Thermistor 4
Setting 43
•
Press “Settings” button to advance to Setting
43.
No setting adjustment.
Displays the defrost sensor temperature.
Reserved
Setting 44-49
Reserved for additional fields.
Output test
Setting 50
•
Press “Settings” button to advance to Setting
50.
•
Press the “Up” or “Down” buttons to adjust to
the desired setpoint.
Steps through relays as output test.
0 = Disabled
1 = Enabled
Reserved
Setting 51-69
Reserved for additional fields.
Default
temperature
Setting 70
•
Press “Settings” button to advance to Setting
70.
No setting adjustment.
Initial temperature set point. Will revert to this
setting upon loss of power.
Default %RH
Setting 71
•
Press “Settings” button to advance to Setting
71.
No setting adjustment.
Initial relative humidity set point. Will revert
to this setting upon loss of power.
Default mode
Setting 72
•
Press “Settings” button to advance to Setting
72.
•
Press the “Up” or “Down” buttons to adjust to
the desired setpoint.
Initial mode set point. Will revert to this
setting upon loss of power.
1 = Auto
2 = Cool
3 = Heat