GDMMTA582-1G
Version 0010
23
Replacing the Skypper brake pads:
Dismount the wheel (see maintenance operation: changing tire).
Unscrew the 2 bolts CHC M8x40 that hold the brake
clamp. Note the position of the clamp wedging
washers. (Figure 6-3)
Disassemble the plastic protection and the circlip.
(Figure 6-4)
Figure 6-3
Figure 6-4
Remove the pad axis and pads as well as the leaf
spring. (Figure 6-5)
Keep the leaf spring in the proper position while
installing the new pads. (Figure 6-6)
Figure 6-5
Figure 6-6
The parking brake mechanism is used to stop any unwanted movement of the trike while
it is on the ground. This is activated by pressing the brake and moving the latch into the
groove. The next time that the brake is pressed the latch will disengage.
Summary of Contents for Skypper 582 S
Page 44: ......
