GDMMTA582-1G
Version 0010
38
Pitch Adjustment
Position the adjusting tool 62G as shown (Figure 6-27 and Figure 6-28). Adjust the pitch
on all blades.
Warning: a space between the wedge and the blade area represents +/- 0.1° and may
induce vibrations while operating.
Tighten moderately the bolts M8. Check the pitch on all blades then tighten the bolts M8
crosswise with a 15NM torque.
Tighten all the M6 lock nuts.
Figure 6-27
Figure 6-28
Choice of Pitch
On ground and without other information, the setting to obtain before a flight test should
be +/-80% of maximum setting.
In use, the engine should turn at the maximum RPMs authorized by the constructor at the
highest possible level flight speed. The final setting should be corrected in favor of
“cruising” or “climbing” for a slightly higher or lower blade angle.
Factory Standard Settings
Rotax 582, reduction 1/3.47 UL
Propeller: Arplast 166 DAS48 (three-blade)
Tool : 48 DR (ref. 105852)
Setting : 1st notch from the G (Figure 6-29)
Figure 6-29
Summary of Contents for Skypper 582 S
Page 44: ......
