GDMMTA582-1G
Version 0010
37
Tighten moderately the bolts M8. Check the pitch on all blades then tighten the bolts M8
crosswise with a 15NM torque.
Tighten all the M6 lock nuts.
Figure 6-24
Figure 6-25
Arplast 166 DAS48 Three- or Four-Blade Propeller Assembly
Lubricate lightly the metallic rings of the blades in order to prevent corrosion and to ease
rotation while adjusting the pitch.
Place the blades into the sockets of the unmarked half of the hub opposite of the engine.
Cover with the other half of the hub (marked with an F) while respecting the position of
the angular marks. Set the bolts M8 and the lock nuts M6 of the blades, but without
tightening.
Mount the engine flange assembly (F on the flange) with the bolts M8x100 and the nuts
without tightening fully so that the blades can still rotate. (Figure 6-26)
Figure 6-26
Marks should face one another.
Summary of Contents for Skypper 582 S
Page 44: ......
