GDMMTA582-1G
Version 0010
18
Particular care should be given to electrical and electronic equipment before
cleaning. Solvent should not be allowed to enter this equipment. Electric/electronic
components should be protected before saturating the engine with solvent. Any oil,
fuel, and air openings on the engine and accessories as well as the BRS parachute
should be covered with a thin plastic film before washing the engine with solvent.
Caustic cleaning solutions should be used cautiously and should be neutralized after
use.
Windshield
The windshield is made from a polycarbonate material and therefore a certain amount of
care is required to keep it clean and in good condition. The following procedure is
recommended.
1. Flush with clean water to remove excess dirt, bugs and other loose particles.
2. Wash with mild detergent and warm water. Use a soft cloth or sponge, do not rub excessively.
3. Rinse thoroughly, and then dry with a clean moist chamois cloth. Do not use volatile solvents such
as gasoline, alcohol, benzene or most commercial window cleaning sprays, as they will adversely
affect the plastic.
Painted Surfaces
The painted exterior surfaces of the aircraft can be washed using a mild detergent and
water, alternatively an automotive liquid detergent may be used.
Engine
An engine and accessories cleaning should be performed regularly to remove any oil,
grease, and other residue. Periodic cleaning allows proper inspection of the engine
components and can be an aid to discovering defects during inspection as well as
reducing the potential for an engine fire during aircraft operation.
The engine may be washed down using a suitable solvent, and then dried thoroughly.
Propeller
The propeller should be cleaned occasionally with water and a mild detergent to remove
dirt, grass and bug stains. The opportunity should be taken to visually check the condition
of the propeller during cleaning.
Upholstery and Interior
The Pod area should be vacuumed out to remove all loose Dirt/Gravel etc. The seat is a
structural part of the airframe and care should be taken to avoid any substance that will
degrade the webbing material, vacuuming is recommended for the upholstery.
Summary of Contents for Skypper 582 S
Page 44: ......
