GDMMTA582-1G
Version 0010
26
Tires
Front Tire: between 1 and 1.2 bars
Rear Tires: between 1 and 1.2 bars
When operating on smooth surfaces increased pressure may be desirable, Operator
experience and tire wear pattern may be used as a guide to determine modifications to the
specified pressures.
When checking tire pressure, the opportunity should be taken to examine the tires for
wear, cuts, bruises, slippage, and other defects and to replace as necessary.
Because the tires on the trike contact the runway in an uneven manner, the rear tires may
be swapped with each other in order to utilize all of the tread. This should be done before
the tire becomes worn.
Changing the Tanarg rear wheel tire:
Lift the trike by the undercarriage (see 3.5.2
Lifting One Rear Wheel).
If three-brake option equipped:
Unscrew the 5 bolts BHC M6 that hold the
brake disc. Be careful not to brake and not
to remove the brake hose (otherwise the
circuit will drain).
Remove the wheel. (Figure 6-12)
Changing the Tanarg front wheel tire:
Lift the front of the trike (see 3.5.3 Lifting the
Front Wheel).
Unscrew the 5 bolts CHC M6 that hold the
brake disc. Be careful not to brake and not to
remove the brake hose (otherwise the circuit
will drain).
Unscrew the 4 bolts CHC M8x40 that hold the
connecting rods to the shock absorbers and
the fork.( Figure 6-13)
Figure 6-12
Figure 6-13
Summary of Contents for Skypper 582 S
Page 44: ......
