5-45
Chapter 5: SYSTEM SETTINGS BY SOFTWARE
(5) BGM
Set whether the IP station receives BGM broadcasts. If receiving, place a checkmark and select the BGM
channel number (1 – 8; Channel No.).
(6) Door station mode
Set whether to operate the IP door station in door station mode*.
* The call tone sounds only once at the IP door station when the IP door station calls the pre-programmed
master station. The call timeout and conversation timeout are set to 30 seconds each.
(7) Access to priority call operation (IP master station only)
Enables the IP station to initiate priority calls.
(8) Refusal of priority call operation
Enables the IP station to refuse priority calls from other stations.
(9) Access to paging call operation (IP master station only)
Enables or disables paging calls from the IP station.
(10) External equipment control (IP master station only)
Set whether the one-shot make output or make/break output is operated at the IP station.
(11) Door remote
Set the Multi interface unit's unit number and contact output terminal number to be used for door remote
control.
(12) Calling party indication/CCTV control
Contact output No.:
Set the Multi interface unit's unit number and contact output terminal
number, which provide a make signal when the station is called.
Calling station's station No.: Set the station number to be simultaneously displayed on the calling station
indication board and monitor screen. Up to 8 stations can be set.
Summary of Contents for AN-8000EX
Page 225: ...Chapter 8 APPENDIX ...