manualshive.com logo in svg

Aiphone AN-8000EX, Operating Instructions Manual, Page: 11 / 244

Share
Download
Aiphone AN-8000EX Operating Instructions Manual Download Page 11

11

• Be sure to follow the instructions below when rack-

mounting the unit. Failure to do so may cause a fire
or personal injury.

· Install the equipment rack on a stable, hard floor.

Fix it with anchor bolts or take other arrangements
to prevent it from falling down. 

· To mount the unit on the equipment rack CR-273

or CR-413, use the rack mounting hardware
supplied with the unit.

· When connecting the unit's power cord to an AC

outlet, use the AC outlet with current capacity
allowable to the unit. 

When the Unit is in Use

• Do not place heavy objects on the unit as this may

cause it to fall or break which may result in
personal injury and/or property damage. In
addition, the object itself may fall off and cause
injury and/or damage.

• Do not stand or sit on, nor hang down from the unit

as this may cause it to fall down or drop, resulting
in personal injury and/or property damage.

Summary of Contents for AN-8000EX





















































































































































































































































Reviews:

No comments