manualshive.com logo in svg

Aiphone AN-8000EX, Operating Instructions Manual, Page: 142 / 244

Share
Download
Aiphone AN-8000EX Operating Instructions Manual Download Page 142

5-10

Chapter 5:  SYSTEM SETTINGS BY SOFTWARE

4.2. Menu

4.2.1. File

Close : Terminates this software program.

4.2.2. Scan 

Unit scan :

Detects equipment connected to the local area network.

Configuration :

Uploads the selected equipment settings.

IP address :

Assigns the IP address automatically and performs settings necessary for

this assignment.

"Auto assignment" :

Assigns an IP address to the selected equipment automatically. 

"Assignment range settings" : Sets  an  IP  address range that can be used for automatic IP address

assignment.

"Subnet mask setting" :

Sets the same subnet mask for the selected equipment. 

"Default gateway setting" :

Sets the same default gateway for the selected equipment.

"Select All" :

Selects all detected equipment.

4.2.3. Help

Help :

Displays "Help".

About : Displays the Software Program version number.

4.3. Buttons

(1) Unit Scan

Detects equipment connected to the local area network.

(2) Configuration

Writes an IP address, subnet mask, default gateway, and name to the equipment.

Summary of Contents for AN-8000EX





















































































































































































































































Reviews:

No comments