manualshive.com logo in svg

Aiphone AN-8000EX, Operating Instructions Manual, Page: 143 / 244

Share
Download
Aiphone AN-8000EX Operating Instructions Manual Download Page 143

5-11

Chapter 5:  SYSTEM SETTINGS BY SOFTWARE

4.4. Using Unit Scan

Scan Exchanges, Multi interface units and IP stations connected to the local area network.

Note

The equipment scan function can only be used within the effective broadcast range.

Step 1.

Confirm that the system is connected to the network and that power is being supplied to the system.
The LNK/ACT indicator on the exchange's or multi interface unit's front panel will light.
The ACT indicator on the IP station will light.

Step 2.

Press "Scan" button or select "Scan 

Unit Scan" from the menu bar. This will cause the MAC

address, Model number, IP address, Subnet mask, Default gateway, Web port, and Name of the
exchange connected to the local area network to be displayed.

Note

The followings are factory-preset values.

IP address: 

192.168.1.1

Subnet mask: 

255.255.255.0

Default gateway:  0.0.0.0
Web port: 

80

Name: 

AN-8000EX, AN-8000MI, AN-8500MS, or AN-8540DS

Summary of Contents for AN-8000EX





















































































































































































































































Reviews:

No comments