![background image](http://html.mh-extra.com/html/aim/mx-utv/mx-utv_user-manual_2871804013.webp)
CHAPTER 5
22
23
MX UTV
The two
custom
pages need to be enabled as shown below. Enabling them “CONFIG”
button top left of the page appears: press it.
Each custom page can show up to four fields. Pressing “SELECT” you can choose the
channel to show in each field (left image below). The only field that can show lap in-
formation is bottom right one (right image below).
5.3.4 Display setup
MX UTV can show up to 4 pages, two of which are pre-defined:
n
RPM & Lap Time (left image here below): shows RPM value and lap time
(and split time if set) other than temperature(s);
n
Speed & Lap Time (right): works exactly like the previous one but shows speed.
In both pages you can see lap time in three formats:
n
static: shown steady for the entire lap; changes when crossing start/finish line;
n
rolling: dynamic, is shown for 5 seconds; afterwards time starts rolling again;
n
+/- best: shows the gap between current lap and the best lap of this session;
if the current lap is the new best lap this is automatically updated and becomes
the reference for the following laps;
n
predictive: it calculates each 50m the predicted lap time using the speed channel
and GPS position.
MANUALE MX UTV 1.00 2018.qxp_Layout 1 05/04/18 12:00 Pagina 25