![background image](http://html.mh-extra.com/html/aim/mx-utv/mx-utv_user-manual_2871804021.webp)
CHAPTER 5
38
39
MX UTV
5.4.7 Connected device visualization issues
It may occur that using Race Studio 3 on an iMac with virtualized Windows the device
connected via Wi-Fi takes some time to be shown in the network or is not shown at
all. This is why we always suggests using an Wi-Fi (WLAN) router.
This router work as an Access Point allowing more external devices to connect to its
network. MX UTV Wi-Fi configuration is to be set on Existing Network as explained in
the related paragraph.
You can scroll the list of available tracks choosing among these options:
n
nearest: shows only tracks in a 10 km distance
n
all: shows all tracks stored in the system in alphabetical order
n
custom: shows only the tracks you have previously created (learning mode)
5.5 GPS and Track management
MX UTV built-in GPS receiver is used for:
n
Lap Time calculation
n
Speed calculation
n
Predictive lap time calculation
n
Position on the track in analysis
To calculate these data the system needs start/finish line coordinates.
MX UTV comes with a long list of the world main tracks. The tracks are constantly up-
dated by our technicians and are automatically loaded to your PC when you run our
Race Studio 3 software and a connection to the Internet is available.
MX UTV provides two track selection modes: automatic and manual.
Automatic:
MX UTV automatically recognizes the
track you are running on, loads the
start/finish line and calculates lap
times.
This is the best mode in most cases.
Manual:
allows to manually select the track
from the internal database. This mode
is to prefer when multiple track confi-
gurations are available nearby. In this
case MX UTV would anyway recognize
the track but would need at least one
complete track lap. To be ready from
the first lap manual mode would be
helpful.
MANUALE MX UTV 1.00 2018.qxp_Layout 1 05/04/18 12:00 Pagina 41